Once you’ve installed your printer driver (see Hardware - Install the Epson Receipt Printer), you may wish to display your logo (or other image) on your receipts.
Add Logo to Epson TM-T88VII
For Epson VII you will need to install the Epson Utility in order to add the logo: Epson TM-T88VII Series Downloads
- Select Correct Operating System
- Under Utilities Select "TM-T88VII Utility v1.30 +" and click download
- Open the Utility
- Add Port
- Select USB (or Ethernet)
- Click OK
- Click Main > Basic Settings > Storing Logos
- Click Add
- Navigate to logo file
- Select
- Click "Ok" to image size message
- Edit Image Width between 48-60mm (Possibly 72mm)
- Select Multi-tone
- Slide a little darker
- Click “Ok”
- Key-code prompt will display, enter 48 & 48
- Change Alignment to “Center”
- Click "Store to printer"
Add Logo toEpsonTM-T88V and TM-T88VI
- Navigate to Devices and Printers.
Note: Press the Windows key on your keyboard and type Devices and Printers to get there as quickly as possible. - Right-click on the appropriate printer and choose Printing Preferences.
- Select the Advanced Settings tab and click the Advanced Settings button.
- Under Printing Timing, select Start of Document and click Select Image.
- Click the Specify NV Logo button.
- Click the Storing Logos button.
- Click the Add button.
- Navigate to the location where you saved your image file and double-click it.
- If the image is too large, you'll receive a message to resize it. Click OK.
- Select the Multi-Tone tab. Change the Brightness and Density settings as needed to optimize the image on the right.
- Click OK.
- In the Decimal Number fields, enter 48.
- Click OK.
- From the Alignment drop-down (under the Preview display), select Center.
- Click the Store to Printer button.
- Click OK.
- Click the Set button, then close the APD Utility window.
- Click OK to save your changes and exit the driver.
KB22-079