Scanner - MC1000 Contrast Adjustment (Unsupported)

Written By Ascend knowledge base (Administrator)

Updated at August 30th, 2024

 

Unsupported Hardware

The MC1000 is no longer supported by the Ascend Support team. Please upgrade to the required hardware, which can be found here

 

Note

The Motorola MC1000 has been discontinued by the manufacturer and is no longer supported by Ascend. If you continue to experience difficulty with your hardware, please refer to the manufacture documentation for guidance. If you're interested in upgrading your hardware, visit our website to check out our monthly specials.

Using the handheld device controls

  1. With the scanner turned on, press the blue Function key (lower right) followed by the Shift key (lower left) to access the contrast control shortcut function.
    Photo of the scanner with the Function key and the Shift key circled in orange
  2. Use the up (CTRL) and down (ALT) arrow keys just below the yellow button to adjust the contrast levels.
    Photo of the scanner with the up (CTRL) and down (ALT) arrow keys circled in orange
  3. Once you've reached the desired setting, release all buttons. After a few seconds, the on-screen gradient will disappear allowing you to continue using the device as usual.

Using the remote viewer on your PC

  1. Dock the MC1000 to the cradle connected to your workstation and verify that the Windows Mobile Device Center opens and recognizes your device.
    Screenshot of the Windows Mobile Device Center
  2. From your PC desktop, navigate to the Start (Windows) button on the bottom left-hand corner of your monitor.
  3. Search for CE Remote Viewer and select the Windows CE Remote Viewer application from the list of results.
    Screenshot of the Windows search with  Windows CE Remote Viewer in the Search box and the icon for the program highlighted
  4. Once running, the application will display your scanner device screen on your PC. Select the Start (Windows) button on the bottom left-hand corner of the window, then navigate to Settings > Control Panel.
    Screenshot of Windows menu with Settings highlightedScreenshot of Windows menu with Control Panel highlighted
  5. Select Contrast by double-clicking on the icon.
    Screenshot of Control Panel with Contrast highlighted
  6. Use the slider to adjust the contrast levels.
    Screenshot of the contrast slider from white to black with the words Light and Dark on either side of the menu
  7. Select OK when you're done.

KB22-184